To turn on Beats headphones, press and hold the power button for 1–2 seconds until the LED light turns on. Beats headphones are renowned audio devices which are known for their stylish design and high-quality sounds. Whether you purchase Beats Studio, Beats Solo, Beats fit pro, or Power beats knowing how to turn on them and troubleshoot all common tech- related issues.

Here We Will Discuss

How to turn on beat headphones

The process of turning of your headphones are depend on what model you have purchased. To turn on beat headphones, find the power button sometimes labelled by “b” button on right or left ear cup, press it and hold it for one second.

How to Turn On Beats Headphones: A Detailed Guidance

Turning On Beats Headphones in different models.

I. Beats Solo (Solo Pro, Solo 3, and Solo Wireless)

• Press and hold the power button (located on the right ear cup) for one to two seconds.
• The LED indicator will light up, confirming that your headphones are on.
• If you see no lights, your battery might be drained. Try charging them before turning them on again.

II. Beats Studio (Studio 3 and Studio Wireless)

• Press and hold the power button (usually on the left ear cup) for one to two seconds.
• Your headphones are showing they are turn on if a white LED light turns on.
• If there is no response so, check the problem, check battery if battery is low or just need simple reset.

III. Beats Fit Pro

• Open the earbud’s case and put it out.
• The earbuds automatically turns on once they remove from the case.
• If they don’t the check the battery if they are charged or not. 

IV. Power beats and Power beats Pro

• For Power beats (wired): Press and hold the power button on the cable for about one second.
• For Power beats Pro (wireless): Simply remove the earbuds from the charging case, and they will turn on automatically.

V. Beats Flex

• Press and hold the power button (located near neckband) for one second.
• A white LED light will show that they are turned on.

Troubleshooting- If Beats Headphones won’t turn on

If they are not turning on, then follow below troubleshooting steps:

1. Check the Battery

• If your device is not turning on, they may need to be charged.
• Place earbuds inside the case, plug them charger, and wait at least 10-15 minutes for trying again.

2. Reset Your Beats Headphones

• A reset can resolve many power issues. Here’s how to reset your Beats model:

a) Reset Beats Solo 3 and Solo Pro

• Press the power button and volume down button together for 10 seconds.
• Release the buttons when the LED indicator flashes.

b) Reset Beats Studio 3

• Press and hold the power button and volume down button for 10 seconds.
• Release the buttons when you see the LED lights flash.

c) Reset Beats Fit Pro & Power beats Pro

• Place both earbuds in the case and leave the lid open.
• Hold the system button on the case for 15 seconds until the LED light flashes.

d) Reset Beats Flex

• Hold the power button and volume down button for 15 seconds until the LED indicator blinks.

3. Ensure Proper Charging

• Use an official Apple or Beats charging cable.
• Check for dust or dirt in the charging port.
• Try a different power adapter or USB port.

4. Update Your Beats Headphones

• Sometimes, outdated firmware can cause power issues.
• If using an iPhone, connect your Beats to the Beats app or check for updates via Settings > Bluetooth > Beats device.
• On Android, install the Beats app from the  Google play store and check for updates.

Understand Battery Life and Charging

What are the charging hours for Beats headphones.

• In Beats Solo 3: About 2 hours make it full charge, 5 minutes charge gives 3 hour’s playtime.
• In Beats Studio 3: Takes 2 hours for complete charging.
• In Beats Fit Pro: 1.5 hours make it full charge and case gives additional charging.
• In Power beats Pro: Takes the same time as Beats fit pro.

How to Check Battery Level on Beats Headphones?

• On iPhone

Open the Batteries widget or check Control Centre.

• On Android

Use the Beats app to check battery percentage.

• On Mac OS and Windows

Check Bluetooth settings while connected.

Key Takeaways:

1. Turning on Beats: Each model requires slightly different steps to power on, generally involving pressing the power button for 1-2 seconds or removing earbuds from the case for earbuds models.
2. Troubleshooting: If your Beats headphones won’t turn on, check the battery and reset the device. A simple reset often resolves power issues.
3. Charging Tips: Ensure you’re using official cables, and be mindful of charging times (e.g., Solo 3 takes 2 hours, while a 5-minute charge provides 3 hours of playtime).
4. Battery Management: Use the Beats app to check battery levels on iOS and Android, and on computers, check Bluetooth settings.
5. Firmware Updates: If you’re facing persistent power issues, check for software updates through the Beats app or Bluetooth settings.

Conclusions

Turning on beats headphones are quite easy and simple process, includes just a quick hold on the power button or removing earbuds from their case. Although, if your headphones are not responding, troubleshooting steps can prevent these issues like checking of battery, reset the device, or updating the firmware can resolve your most of the issues.

Battery life and proper charging habits are very important for your beats headphone’s health, long lasting and performances. Using official charging accessories, it can avoid your battery health drainage issues and keep your device firmware upgraded and can reduce power related issue of your headphones.

If your beats headphones are still not turn on after applying all the troubleshooting methods then, it may seek a deeper hardware issue, for this you may contact to beats support or visiting an Apple-authorized repair centre that may help you.

Frequently Asked Questions

1. How do I turn on the Beats Headphones

Turning on beats headphone is slightly different in different models. 

• Beats Solo 3/ Solo Pro: Press and hold the power button on the right ear cup for 1-2 seconds or until the LED lights up.
• Beats Studio 3: Press and hold the power button on the left ear cup for 1-2 seconds or until the LED lights up.
• Beats Fit pro/ Power Fit Pro: Remove the earbuds from the charging case, it turns on automatically.
• Power Beats (Wired): Press and hold the power button on the cable for 1 second, LED lights turn on.
• Beats Flex: Press and hold the power button on the neckband for 1 second light will turn on.

2. Why won’t my Beats headphones turn on?

Your Beats headphones may not turn on due to:

• Low battery – Charge them for at least 15 minutes and try again.
• Firmware issues – Try resetting your headphones.
• Faulty charging cable or adapter – Use a different charger.
• Damaged power button – Contact Beats Support if the button isn’t responsive.

3. How do I reset my Beats headphones?

Resetting can fix many power-related problems:

• Beats Solo 3 / Solo Pro: Hold power + volume down for 10 seconds until LED flashes.
• Beats Studio 3: Hold power + volume down for 10 seconds until LED flashes.
• Beats Fit Pro & Power beats Pro: Place earbuds in the case, hold the system button for 15 seconds until LED flashes.
• Beats Flex: Hold power + volume down for 15 seconds until LED blinks.

4. How do I know if my Beats headphones are charging?

• Solo 3 / Studio 3: The LED indicator on the ear cup will flash while charging.
• Power beats Pro / Beats Fit Pro: The LED on the charging case will light up.
• Beats Flex: The LED turns red when charging and white when fully charged.

5. How long does it take to fully charge Beats headphones?

• Beats Solo 3: About 2 hours for a full charge, 5 minutes of charging provides 3 hours of playtime.
• Beats Studio 3: About 2 hours for a full charge.
• Beats Fit Pro & Power beats Pro: Around 1.5 hours for a full charge.
• Beats Flex: About 1 hour for a full charge.

6. Can I use my Beats headphones while charging?

• Yes, for Beats Solo 3 and Studio 3 if they are plugged in with a 3.5mm audio cable.
• No, for Beats Flex, Power beats Pro, and Beats Fit Pro because they charge in their case.

7. How do I check the battery level of my Beats headphones?

• On iPhone: Open the Batteries widget or check under Control Centre.
• On Android: Use the Beats app to see the battery percentage.
• On Mac/PC: Check under Bluetooth settings when connected.

8. Why do my Beats headphones keep turning off?

Possible reasons:

• Low battery
• Overheating 
• Auto power-off feature
• Firmware issues.

10. Do Beats headphones automatically turn off?

• Yes, some models have an auto power-off feature to save battery.

11. Why are my Beats headphones not charging?

• Check if you are using an official Apple or Beats charging cable.
• Inspect the charging port for dust or debris.
• Try a different USB adapter or power outlet.
• Reset your headphones if they still won’t charge.

13. How do I update my Beats headphones?

• On iPhone/iPad: Updates install automatically via Bluetooth.
• On Android: Use the Beats app to check for updates.
• On PC/Mac: Download the Beats Updater tool from Apple’s website.

14. How do I know if my Beats headphones need a new battery?

Signs that your Beats battery may need replacement:

• They only work while plugged into a charger.
• The battery drains too quickly.
• The headphones won’t turn on at all, even after charging.

If these issues persist, contact Beats Support or visit an Apple-authorized repair centre.

15. Are beats Headphones covered under warranty?

• Yes, Beats Headphones has limited warranty of 1 year.
• Warranty covers manufacturing defaults not accidental damages.
• If your headphones are not turning on and it’s has warranty, so Apple may replace it.

16. Can I use third party charger for my Beats headphones?

• To avoid battery damage, there must be using official Apple original charger.

18. Why do my Beats disconnect randomly?

• Low battery 
• Interference
• Software bug

Search

Search